Orbit Factory Reset

For reference, here is how to reset an E-MU Orbit 9090 v2 (and possibly other E-MU units) to their factory settings (taken from the FAQ at SweetWater).

Q. How do I Reset my unit back to the Factory Default settings?

1. Turn on the unit while holding both Cursor buttons down
2. Once booted up in Diagnostics, turn the Data Entry Control until you see Initialize.
3. Press the Enter button.
4. Press the Enter button again to verify that you want to initialize you unit.
5. Now, turn the unit off. Wait a few seconds and then re-power the unit normally.

Rig-3 ?

Hello (again) world..! Another RIG (v.3) is coming together. The idea is to have a 90's hardware setup (that will fit into a small case), to quickly power up and put together a couple of tracks (probably, predictably, DNB).

The main sound source will be the Orbit, which is loaded with old school dance possibility, and I may use some of the sounds from the EM-1 but this is primarily the sequencer. Using my existing Behringer mixer for now to get up and running but that isn't a 90's piece of kit, but that probably doesn't matter.