The Village Well
Saturday, November 7, 2020
PO-33 Backup & Restore Tips
›
The PO-33 uses an audio data stream to transfer information to and from your computer. This method is similar to how old home computers used...
Monday, August 3, 2020
SP-404 Fat Pads
›
Well, it's been a while since I last posted. Summer 'holiday' so got a chance to order/upgrade the pads on my Roland SP-404. MPC...
Saturday, December 17, 2016
MPC 1000 right hand side PCB replacement
›
The dial on my MPC 1000 is a bit scatty and some of the buttons need to be pushed at special angles. You can work with it but it gets in the...
MPC 1000 Pad Upgrade
›
My MPC 1000 is the original blue/red version, and the pads are the old version where every pad is individual, prone to issues, and not super...
MPC 1000 Compact Flash Hard Drive
›
Rather than put a 'moving parts' hard drive into my MPC 1000 I was reading on mpc-forums about using a CF card instead. This was all...
Saturday, August 27, 2016
Orbit Factory Reset
›
For reference, here is how to reset an E-MU Orbit 9090 v2 (and possibly other E-MU units) to their factory settings (taken from the FAQ at S...
Rig-3 ?
›
Hello (again) world..! Another RIG (v.3) is coming together. The idea is to have a 90's hardware setup (that will fit into a sma...
›
Home
View web version